[aprssig] Auto QSY feature.

[Christensen, Eric H]

I'd be interested in it!  I hate having to switch my status text when I
switch frequencies.  Only problem I can see is if the radio is in scan
mode...

73s,
Eric KF4OTN 

 
-----Original Message-----
From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of James Jefferson Jarvis
Sent: Wednesday, September 07, 2005 2:08 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] Auto QSY feature.

Robert Bruninga wrote:

>In fact, someone should be able to write a clever PIC processor to do 
>it for existing D700's.
>The PIC just queries the radio periodically for the BANDB frequency, 
>and then writes that into the APRS status text.  This could just be a 
>dongle hanging off the radio's serial port.
>  
>

I did this and showed it at the Hartford, CT DCC. I don't recall anyone
being interested in it.

-Jim KB0THN


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 3116 bytes
Desc: not available
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20050907/c6b88811/attachment.p7s>