[aprssig] Question about low power APRS in Los Angeles area
Robert Bruninga
bruninga at usna.edu
Wed Oct 19 20:10:43 EDT 2005
Here is an answer to your local digi question. It
may be totally wrong, but you have 2 choices:
1) If you want very low power coverage in that
area for local users (but who do not travel outside
that area), then put up an alt-freq digi in that area
with 144.99 input (if avail) and 144.39 output. Then
low power bike-rigs can hit it every time.
2) If your bikes travel out of that area and you
also want to support other travelers in your
blind zone, then put up your WIDE1-1 digi on
144.39, but recognize your bike will have to
compete with everything else on 144.39 to
get in.
My opinion is to start building an alt-freq input
system for such low power trackers everywhere
in the entire area. Any old TNC can be a WIDE1-1
digi and are easy to put up... Please name
your alt-freq digis like mine: 99ANAP to show
that it has a 144.99 input in Annapolis. THis
makes them obvious to other users on 144.39
Read about alt-digis on the FIX14439 page
(google it).
de Wb4APR, Bob
>>> jimlux at earthlink.net 10/19/05 7:37 PM >>>
On behalf of Courtney N5BF, I am forwarding this for comments and potential
answers. I've inserted some additional information in the middle (in
square brackets) to clarify certain local aspects. Here's some background
geographical information too:
The JPL Amateur Radio Club (JPLARC, W6VIO) has a 220 and 440 repeater on
Cerro Negro, which is a hill that has a view of downtown LA as well as La
Canada. Coverage map at:
http://wr6jpl.ampr.org/cn_lcf.html
We also have a 2m site up on the JPL Mesa Antenna range above the lab.
Coverage map is at: http://wr6jpl.ampr.org/jpl_mesa.html
And, the references to 180 refer to a 9 story building at the West end of
the lab where we have a shack on the roof with some UHF and VHF equipment
(and a network connection)
If you look at the picture here:
http://www.jpl.nasa.gov/about_JPL/images/jpl-browse.jpg
Bldg 180 is the tall slab-like building at the left side of the picture
with vertical white stripes. That picture also shows the Mesa antenna
range along the ridgeline directly behind the lab.
The N6EX repeater is some 5 miles to the east.
From: "Courtney B. Duncan" <courtney.b.duncan AT jpl.nasa.gov>
Subject: APRS in Canada/Crescenta
To: James.P.Lux AT jpl.nasa.gov
Local guidelines for APRS use recommend WIDE2-2 as the best path in
SoCal. I observe that this is true for mobiles running something like 25
watts to an outside antenna, even up here in our little valley.
I now have experimental evidence that Bicycle or Hiking mobiles (think "HT
on high power") in this area are not well served. In half a dozen 30-60
minute bicycling trips through the hills and vales west of JPL, I've
managed to get an average of one packet into the network per trip,
something like a 3% success rate. Clearly this won't do.
Running 25 watts bicycle mobile is problematic and is not a good "routine"
solution.
Mild research on this subject leads me to believe that using an alternative
path of WIDE1-1,WIDE2-1, or RELAY,WIDE2-1, would help me, as a QRP user, by
activating localized digis that are meant to fill in holes like ours. I
could easily install one of these at my house, but my house doesn't have
good views into the Crescenta/Canada valley either. I'm in that hole on
the 210 at the Ocean View exit where you start to lose the JPL 2 meter
repeater [up on the Mesa antenna range] while westbound. KK6PD operates a
RELAY further west, but he is in a worse location than me, nearly under the
freeway near Lowell right before you lose all JPL repeaters westbound. We
don't need something very high up to help in the valley here, but we do
need something that is not at the bottom of a debris basin as KK6PD and I are.
I note from my (car) mobile trip raw data that none of the big WIDEn-N
stations (the N6EXs and others) are closer than about 20 miles from us
here. Though La Crescenta is the "back porch of L.A.", our blockage to the
south gives the area unique problems in this network. Like I said, 25
watts mobile works fine, HT on high power barely works at all.
From my perspective, one of those big N6EX WIDEn-N stations on Lukens or
Cerro Negro would totally fix this. From an L.A. basin network planning
perspective, however, this might add too much node crowding. (I don't know
this, I'm just speculating.) From my personal perspective, a WIDE1-1 digi
in our Building 180 shack, or at the 147.15 site or on the Lund building up
in La Canada would fix it too.
An aside. It looks like the modern recommendation is to set up localized
digis with WIDE1-1 for this. It also looks like, from my study of packet
traces that I can see from my house, that if one of the big WIDEn-N guys
sees you, even though you have RELAY in your path and even though you
haven't been repeated by RELAY*, he will still pick you up and do the next
thing, like WIDE2-1. If this is true, then my QRP station should always
run WIDE1-1,WIDE2-1 so that if seen either by a localized digi or by
WIDEn-N, I'm in. But, it wouldn't help around here because right now there
are no WIDE1-1 digis. Using RELAY,WIDE2-1 would work except I lose KK6PD,
the only local RELAY, when I turn left out of my driveway.
So, here's the question. If the club ran a 144.39 radio at Cerro Negro, on
the mesa, or on top of 180, would we configure it for digi use by local QRP
stations and if so, how? Or, would it make sense for it to be a WIDEn-N
node? In terms of the SoCal network, what would be our preferred location
and configuration? What kind of installation makes the most sense in terms
of our service to the local valley, my own problem notwithstanding?
Does the club have old (or new) radios and TNCs sitting around that could
be put into this service? [We probably do.] If it's just a matter of making
a cable or loading some software or something, I'd be happy to work on
it. If it means installing something new on Cerro Negro, that's probably a
broader effort.[We have limited access to the repeater site on Cerro Negro,
and limited room once you get there]
Courtney
OK all you APRS gurus.... what's the best solution for Courtney's
problem... directional antennas? Beaconing every 0.5 seconds? Microwave
transmission of power to Courtney as he bikes through the hills (keeps him
warm AND connected simultaneously)?
http://www.findu.com/cgi-bin/find.cgi?call=n5bf-3&terra=4
http://www.findu.com/cgi-bin/find.cgi?call=n5bf-4&terra=4
Jim, W6RMK
_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
More information about the aprssig
mailing list