[aprssig] Fill-In digis ?

William McKeehan mckeehan at mckeehan.homeip.net
Mon Oct 3 17:22:04 EDT 2005


Exactly what I was looking for - thanks!

The NWAPRS site has a lot of information. Do you (or anyone else) have any
discussion on how to determine if a digi should be a Fill-in Digi vs a Full
WIDEn-N dig?

On Mon, October 3, 2005 5:18 pm, Keith - VE7GDH said:
> William KI4HDU wrote on Oct 3 2005
>
>> Does anyone have any recommended settings (under the new
>> n-N paradigm) for "Fill-In digis"? Specifically for a KPC3+
>
> There is a pretty good write-up at the NWAPRS site at
> www.nwaprs.info for both WIDEn-n digis and for WIDE1-1
> digis. Follow the "fill-in digis" link, or just go straight to
> www.nwaprs.info/fill-in.htm. Edit the settings in the example
> for your own lat / long, your own callsign and location in the
> LT buffer, your own PHG, KPC-3+ version number, etc. You
> could do a full reset ahead of time.
>
> 73 es cul - Keith VE7GDH
> --
> "I may be lost, but I know exactly where I am!"
>
>
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>


-- 
William McKeehan
KI4HDU
Internet: mckeehan at mckeehan.homeip.net
http://mckeehan.homeip.net




More information about the aprssig mailing list