[aprssig] KPC3 settings

[kb2scs at optonline.net]

Hi Jason 
              Oops
Turn off MCOM as in
CMD: MCOM off

The MR command that I mentioned before will cause you to see
control frames such as <FRMR> <REJr>...
The MCOM command causes you to see the <UI> that you are seeing.
Turning off both of these commands is a good idea any ways.

On 20 Mar 2005 at 18:54, kb2scs at optonline.net wrote:

> Hi Jason
>               Turn off MResp as in
> CMD: MR Off
> 
> On 20 Mar 2005 at 18:31, n1iic Jason Greene wrote:
> 
> > Greetings, everyone. I have aprsd running and it is rejecting all 
the packets. 
> > After looking at the received data, the KPC-3 is also sending 
<<UI>> with every packet and I just can't seem to find the setting to 
turn that off.
> > Can someone please tell me which setting that is?
> > 
> > Thanks
> > 
> > Jason n1iic
> > 
> 
> 
> Let us hope we never witness the "Silence Of The Hams"
> 73 DE John  KB2SCS
>        E-Mail:            kb2scs at arrl.net
>        APRS-SCS     http://www.tapr.org/~kb2scs
>        Web Page:     http://www.qsl.net/kb2scs
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig


Let us hope we never witness the "Silence Of The Hams"
73 DE John  KB2SCS
       E-Mail:            kb2scs at arrl.net
       APRS-SCS     http://www.tapr.org/~kb2scs
       Web Page:     http://www.qsl.net/kb2scs