[aprssig] K5FTW-5 Digi Changes

Richard Montgomery kb4ytm at gmail.com
Wed Jun 1 14:52:19 EDT 2005


Hey Mike,

I also setup 4 digi's with the 8.3 parms but they have 8.2 and also 
didnt choke on the UITRACE WIDE,30.  But, I did have to add WIDE1-1 to 
the UIDIGI list to get that part to work properly. UIDIGI ON 
WIDE1-1,WIDE5-5,WIDE6-6,WIDE7-7 I think is how I have them.

I also kept the S overlay since it half worked like the 8.3.

Richard


Mike Heskett wrote:
> The K5FTW-5 digi in Fort Worth, TX has been changed to the new paradigm. 
> However, there was a hitch.
> It is a KPC3 (not a +) with 8.2 (3F4427265).  I read the 8.2 
> implementation and it said that if it choked on the 30 in the command:
> 
> UITRACE WIDE,30
> 
> then you need to implement the 8.2 rules.  Well the TNC did not have a 
> problem with the command so I thought (there is the problem) it must be 
> OK. I implemented the 8.3 rules but found that when I transmitted a 
> packet with WIDE1-1, WIDE2-1 this is the way it got digipeated:
> 
> WB5QLD>APS221,K5FTW-5*,WIDE1,WIDE2-1/1:=3250.56N/09711.49W-PHG6230 Mike 
> - Hurst, TX
> 
> The WIDE1 appears to be the problem described in the 8.2 implementation, 
> so I changed it to the 8.2 commands.
> 
> ==/===/===/===/===/===/===/===/===/===/===/===/===/===/===/===/===/
> Mike Heskett    email     mheskett at mindspring.com 
> </ym/Compose?To=mheskett at mindspring.htm>
> WB5QLD  WWW       http://mheskett.home.mindspring.com/
> Hurst, TX
> O-
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

-- 
http://linuxfirewall.no-ip.org/aprs/




More information about the aprssig mailing list