[aprssig] PATH clarification when travelling

w2pi at optonline.net w2pi at optonline.net
Fri Jul 29 13:53:58 EDT 2005


My impression is that the preference would be WIDE1-1, WIDE2-2 - and take the penalty of not having positions repeated unless you are either in range of a WIDEn-n or in an area that supports the new paradigm...

Is this right?

Paul, W2PI
-------------- next part --------------
[Apologies if this gets posted twice...]
 
Okay, I *think* I'm pretty clear on the new paradigm, but there's one
lingering question to toss out. It involves a mobile taking a trip that'll
involve travelling through areas that have upgraded to the new paradigm, and
some that haven't.
 
If one were to set the path to, say "RELAY,WIDE1-1,WIDE2-1", would that be
the best compromise? I'm well aware that stopping to change the path as you
entered each area would be ideal, but without adequate info (eg. a
centralized database) of what PATH works best in what areas, that's a tad
difficult (not to mention inconvenient in some cases).
 
Specifically, if I'm in an area where RELAY has been discontinued, and a
local digi hears the above packet, will it just ignore the RELAY and deal
with the WIDE1-1? Or will the fact RELAY is in the packet cause the whole
thing to be tossed out?
 
Brad.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.tapr.org/pipermail/aprssig_lists.tapr.org/attachments/20050729/b26fc39f/attachment.html>
-------------- next part --------------
_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig


More information about the aprssig mailing list