[aprssig] Digipeating with TM-D700A

[Chris Rose]

I use that configuration when I attend monthly club
meetings and take my hand held inside and leave my
mobile on in the parking lot.  I am not sure why it
doesn't work for you.  Is the structure of the
building interfering with transmission?  
I may have my UIDIGI set to Relay, Wide.  
If you don't have any locals responding to Realy then
that may be the problem?

73,
Chris
KB8UIH

--- Ken Kinyon <w7ts at comcast.net> wrote:

> I have agreed to demonstrate some APRS software at a
> ham fest.  I will
> however be inside a building.  I will be using a
> Laptop and TH-D7A.  I
> thought I could configure the TM-D700A in my truck
> in the parking lot to
> digipeat so I could receive some signals inside. To
> test it I set the UIDIGI
> parameter in the D700 to relay and turned digipeat
> on.  T set the path in
> the TH-D7 to relay, wide.  The D700  digipeats the
> TH-7's signal and it
> shows up on Find-U.  However the D700 will not
> digipeat any one else's
> signal so I can pick it up on the hand held and
> display it on the computer.
> I imagine this is because I am not directly
> receiving anyone who has relay
> in their path.  Is there a way that I could set the
> D700 to digipeat some of
> the relay or wide stations in the area (Loveland
> Colorado) so something
> besides the hand held and my truck will show up on
> the computer?.  I am
> aware that this is going to add to the traffic, but
> it will be a short
> duration demo.
> Thanks,
> Ken W7TS
> 
> 
> -------------------
> Kenneth E.  Kinyon
> 34 Princeton Circle
> Longmont, CO 80503-2106
> -----------------------
> E-mail: W7TS at comcast.net
> ------------------
> 
> 
> 
> _______________________________________________
> aprssig mailing list
> aprssig at lists.tapr.org
>
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>