[aprssig] Digipeating with TM-D700A

[Richard Holder]

Would it be possible to set up the D700 to crossband repeat thus bypassing the
need to set up the D700 for aprs digipeating?




At 11:47 AM 1/14/2005 -0700, you wrote:

>I have agreed to demonstrate some APRS software at a ham fest.  I will
>however be inside a building.  I will be using a Laptop and TH-D7A.  I
>thought I could configure the TM-D700A in my truck in the parking lot to
>digipeat so I could receive some signals inside. To test it I set the UIDIGI
>parameter in the D700 to relay and turned digipeat on.  T set the path in
>the TH-D7 to relay, wide.  The D700  digipeats the TH-7's signal and it
>shows up on Find-U.  However the D700 will not digipeat any one else's
>signal so I can pick it up on the hand held and display it on the computer.
>I imagine this is because I am not directly receiving anyone who has relay
>in their path.  Is there a way that I could set the D700 to digipeat some of
>the relay or wide stations in the area (Loveland Colorado) so something
>besides the hand held and my truck will show up on the computer?.  I am
>aware that this is going to add to the traffic, but it will be a short
>duration demo.
>Thanks,
>Ken W7TS
>
>
>-------------------
>Kenneth E.  Kinyon
>34 Princeton Circle
>Longmont, CO 80503-2106
>-----------------------
>E-mail: W7TS at comcast.net
>------------------
>
>
>
>_______________________________________________
>aprssig mailing list
>aprssig at lists.tapr.org
>https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.0.300 / Virus Database: 265.6.11 - Release Date: 1/12/2005

Richard Holder


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.6.11 - Release Date: 1/12/2005