[aprssig] 10 MHz transmitter for APRS

[Ken Kinyon]

"How would that keep from transmitting when another station is transmitting?

Bad enough to do it in a small area with low power on VHF.  HF is a
different, very very BIG, world.

Bill"

Good point,
I guess it better be a transceiver.
Thanks,
Ken W7TS

-------------------
Kenneth E.  Kinyon
34 Princeton Circle
Longmont, CO 80503-2106
-----------------------
E-mail: W7TS at comcast.net
------------------

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of Bill Vodall
Sent: Wednesday, January 12, 2005 11:51
To: TAPR APRS Mailing List
Subject: Re: [aprssig] 10 MHz transmitter for APRS


Ok.  I'll play the heavy...

> After looking at the gaps in 144.39 coverage along some of the routes I
travel,  I think I want to put a tracker on 10
MHz in my
> truck.  I don't need to receive, I only want to show up on the internet.
I don't want to tie up the HF transceiver.
>  Any ideas for a inexpensive transmitter?  Crystal control would be fine.


How would that keep from transmitting when another station is transmitting?

Bad enough to do it in a small area with low power on VHF.  HF is a
different, very very BIG, world.

Bill


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig