[aprssig] Quick Help with a KPC-3

Eric H. Christensen kf4otn at earthlink.net
Wed Jan 12 15:50:23 EST 2005


I just want to make sure that the line isn't too long...

I'll be using 8.2
-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Bill Herrmann
Sent: Wednesday, January 12, 2005 15:49
To: aprssig at lists.tapr.org
Subject: Re: [aprssig] Quick Help with a KPC-3


> Can someone see if the following command is accepted by a KPC-3
real 
> quick?
>
> UIDIGI ON RELAY,WIDE,WXAKQ,WXMHX

It would depend on what firmware version the KPC-3 had. I think (from
memory here) that you have to be at 6.something or above for that to
work. I'm 99% sure that that will work for release 8.2, which is the
last version Kantronics released for the KPC-3.

It will definitely not work if you're on one of the older versions of
firmware.

Bill




_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig






More information about the aprssig mailing list