[aprssig] New n-N Paradigm Bulletins

Brad [VE3BSM] lists.nospam at bpsmicro.com
Mon Feb 14 15:16:21 EST 2005


Does anybody know if UI-View has a mechanism to send out bulletins on some
timed basis?

BTW, the URL in BLNB below should be:
http://www.ew.usna.edu/~bruninga/aprs/fix14439.html  :-)

Brad.
VE3BSM

-----Original Message-----
From: aprssig-bounces at lists.tapr.org [mailto:aprssig-bounces at lists.tapr.org]
On Behalf Of Robert Bruninga
Sent: Monday, February 14, 2005 3:06 PM
To: aprssig at lists.tapr.org
Subject: [aprssig] New n-N Paradigm Bulletins

The simplest and most effective thing we can do for our APRS channel is post
these bulletins.  It doesnt even require a trip to the digis:

BLNA: Pse see the New APRS Paradigm for better network efficiency
BLNB: See http://www/ew.usna.edu/~bruninga/aprs/fix14439.html
BLNB: Pse use WIDE2-2 instead of WIDE,WIDE. It's much more efficient
BLNC: Pse try WIDE2-2 instead of RELAY,WIDE too.  Much fewer dupes.

If your area is a WIDE3-3 area then:

BLNB: Pse use WIDE3-3 instead of W,W,W. It's much more efficient
BLNC: Pse try WIDE3-3 instead of R,W,W too.  Much fewer dupes.

If your area has made a big push for SSn-N then maybe:

BLNB: Pse try SSn-N for in-state comms.  It's much more efficient
BLNC: WIDEn-N will be back on after everyone learns new paradigm.

or something like that...

That is what I am putting out in my WIDE2-2 area.  ANd the difference is
amazing!  In a week we are now down to only 30% still using the W,W type
paths.  And you can hear the difference..  Now there are even some silent
gaps up to a few seconds long between packets...

And be careful to not alienate anyone.  Most users are not on this SIG and
have no clue what this is all about.  
Dont blind side them, give them a chance to catch up with the Bulletins
above...

Bob

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig





More information about the aprssig mailing list