[aprssig] PCSAT Digi onto normal APRS channels

[Robert Bruninga]

Because the PCSAT WEB page is driven only by
packets seen as PCSAT-1*.    After going thought
the satgate, then they show as SATGATE*.

Bob

>>> Eric Christensen <kf4otn at earthlink.net> 2/7/05 6:21:29 PM >>>
Why would the fact it went via PCSAT-1 be lost?  If he is running his
digipeater with the alias of SGATE, then the only packets that would be
digipeated by him are the ones that have a path similar to:
"PCSAT-1,SGATE,WIDE".  The path would stay intact.

73s,
Eric KF4OTN
kf4otn at amsat.org 
http://www.ericsatcom.net 

Project OSCAR Member
AMSAT-NA Member: 35360
AMSAT Eastern North Carolina Area Coordinator

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org] On Behalf Of Robert Bruninga
Sent: Monday, February 07, 2005 18:14
To: aprssig at lists.tapr.org; vk4tec at tech-software.net 
Subject: Re: [aprssig] PCSAT Digi onto normal APRS channels


This is not a good idea, since once it gets digipeated to
the terrestrial channel the fact that it went via PCSAT-1
is lost.  It wont show up on FINDU...    Bob

>>> "Andrew Rich" <vk4tec at tech-software.net> 2/7/05 4:44:26 PM >>>
Howdy,

I was thinking of placing a radio on 145.825 with an alias of satgate.
It would then have an offset to the normal APRS freq here of 145.175.
The idea being that when PCSAT or ISS turn up, the TNC will try and 
digi them, flick up to the normal APRS channel.

I am just wondering would I need to set the UI path to relay to go via

the local digi ?

Ideas ?

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig


_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org 
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig