[aprssig] KPC-3

Andrew Rich vk4tec at tech-software.net
Mon Aug 29 10:02:40 EDT 2005

an you have to use the "digipeater" menu in UI-VIEW to do the same as what
you did in Command mode

Actually UI_VIEW wont let u go into digipeater setup UNLESS you have a kiss

-----Original Message-----
From: aprssig-bounces at lists.tapr.org
[mailto:aprssig-bounces at lists.tapr.org]On Behalf Of J. Lance Cotton
Sent: Monday, 29 August 2005 11:35 PM
To: TAPR APRS Mailing List
Subject: Re: [aprssig] KPC-3

Joseph R. Skoler wrote:
> In CMD mode, I turned on digipeating.
> I now use it in KISS mode (UI-VIEW).
> Will the KPC-3 still digipeat according to the settings set in CMD mode?

No, in KISS mode, the TNC's internal firmware is essentially off. In
KISS mode, *all* operations, sources of transmit commands, etc. are from
the host computer.
J. Lance Cotton, KJ5O
joe at lightningflash.net
Three Step Plan: 1. Take over the world. 2. Get a lot of cookies. 3. Eat
the cookies.

aprssig mailing list
aprssig at lists.tapr.org

More information about the aprssig mailing list