[aprssig] how to implement 'No more relay' for dummies
Richard Amirault
ramirault at erols.com
Tue Apr 5 13:37:20 EDT 2005
How do we reach the (many) folks who don't read this list?
Richard Amirault N1JDU
Boston, MA, USA Go Fly A Kite
----- Original Message -----
From: "Wes Johnston"
Subject: [aprssig] how to implement 'No more relay' for dummies
> Short and to the point (I hope).... I know some of these threads get
> long and people begin to glaze over... here is the summary:
>
> ----------------------------------------------------------------------
> If you are a home station....
> and you use a real TNC in serial mode Change the TNC parameter MYA from
> RELAY to WIDE1-1
>
> or you use UI-View with a TNC in KISS mode, simply remove RELAY as a
> supported alias and replace it with WIDE1-1.
>
> or you use WINAPRS, change your TNC startup file and replace MYA RELAY
> to MYA WIDE1-1 .
>
> ----------------------------------------------------------------------
> If you are a mobile station....
> change your outbound path to WIDE1-1,WIDE2-1 or WIDE1-1,WIDE2-2
>
> WIDE2-2 will work everywhere, but you'll loose the ability to bounce
> packets off someone's house when you are in the boonies.
>
> ----------------------------------------------------------------------
> If you are a digi owner...
> you don't have to do anything!
>
> After a transition period, you may wish to drop the word RELAY from your
> UIDIGI list.
>
> Wes
> aprssig mailing list
> aprssig at lists.tapr.org
> https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig
More information about the aprssig
mailing list