[aprssig] x1j nodes

[Brian Webster]

Wes,
	I can get our X1J node to show up on Ui-View if I use the relaxed packet
rules. The real problem is that I need to replace that chip with a smart
digi chip and use Bob's new tips to make the QRM go down. I sent a message
to him for suggestions on good setting based on his ideas.

Brian, N2KGC




-----Original Message-----
From: Wes Johnston [mailto:aprs at kd4rdb.com]
Sent: Thursday, December 16, 2004 11:55 AM
To: aprssig at lists.tapr.org
Subject: [aprssig] x1j nodes


I know that x1j digipeaters add a little something to the beginning of the
beacon text making a position packet not decode in any aprs client (used to
in
DOS aprs, but not any more as I recall).

My question is this:  Instead of programming the beacon text to be the
position,
why not program the beacon text to contain a 3rd party packet, and have the
encapsulated 3rd party packet actually contain the location of the
digipeater?
Would that be decodable by any aprs clients?

Wes

_______________________________________________
aprssig mailing list
aprssig at lists.tapr.org
https://lists.tapr.org/cgi-bin/mailman/listinfo/aprssig